image

AccessPack

AccessPack is an access control system that can be fitted to any electrically powered device. Keep your plant and personnel safe by ensuring only specifically authorised persons can use hazardous or specialist equipment. Equipment can also be locked out when maintenance or certification intervals are exceeded. AccessPack is easy to install, even easier to administer and scalable.

[more]
image

Liftlog™

Liftlog™ is a remaining life and load limiting data-logger for cranes that logs all hoisting motions as well as longitudinal and transverse travel. Accompanying software takes the wirelessly downloaded data and applies AS2550.1-2011 (or alternative standards) to calculate the remaining life of the crane. Liftlog™ can also provide electronic overload protection if required. Models are available for all load input types.

[more]
image

Liftlog™XL

Liftlog™XL is an advanced remaining life and load limiting data-logger for single or dual hoist cranes. Every motion is wirelessly streamed in real-time to a secure server that analyses the data, looking for patterns of misuse that could lead to premature failure or unsafe conditions. Data can be viewed at any time via a web interface, which also provides a lift by lift analysis of usage and calculates the remaining design life in accordance with AS2550.1-2011. Most importantly, overloads and dangerous usage will trigger immediate email or SMS alerts.

[more]
image

HiBeam

HiBeam 200 is the brightest 100mm, 5 digit load display available on the market in a Stainless Steel case. It can accept all types of load signals (mV, V, mA, Frequency, Abus LIS Q-Link or ControlPro Volts) and connects wirelessly with Sole Digital data loggers or load limiting systems, eliminating the need for additional cabling.

[more]
image

SideWise

SideWise is a simple anti-side-pull system that ensures loads are only lifted vertically. It can easily be retrofitted to existing cranes and consists of a sensor unit mounted on the rope with a signal processing module in the hoist control box. Crane motion is disabled as soon as any long or cross-travel horizontal loads are detected.

[more]
image

TrafficLite

TrafficLite is a device that takes a crane load input (directly from a load cell or via another device) and then activates up to four set point relays depending on the value of that load. Its primary intent is to drive a Green-Amber-Red traffic light display and set of overload contacts, but can be used to drive any other four independent set point relays. Models are available for all load input types.

[more]
image

MaxOut

MaxOut is an inexpensive electronic load limiter that’s quick, easy and safe to set up and calibrate. Models are available for all load input types.

[more]
image

AirWay

AirWay is an electronic device that wirelessly transmits and receives up to 4 input/output control signals. It can be used to provide remote I/O for products such as Liftlog™ or Liftlog™XL data loggers, where the desired signals cannot be cabled into the logger directly. Alternatively, two AirWay units can be used together to provide up to 4 virtual connections.

[more]
image

RC3/RC5/RC10T Load Cells

RCxT Load cells are clamp-on strain-gauge load cells that can be quickly and easily fitted to ropes from 8 to 28mm in diameter. They are available individually or as a bundle with another Sole Digital product.

[more]
image

Link2

Link2 is a long range USB Bluetooth modem for configuring Sole Digital products from a laptop.

[more]
image

Site Sentinel

The Site Sentinel is a device to extract real-time data from HoistNet devices (such as Liftlog and AccessPack) and transmit the data via 3G to a secure webpage.

[more]